Metal curtains roll with tubular motors
The metal roller curtains with tubular motors represent the ideal solution for closing commercial and industrial spaces, still representing a high protection against effraction. They are made exclusively of galvanized steel and run only in the electric version, but with the possibility of manual actuating in emergency situations. The dimensions of the metal curtains roll with tubular motors differ, and can be adapted to the needs of customers. Thus, they can have the following maximum dimensions: length 6000 mm, height 5000 mm and surface 30 sqm.
The coiled metal perdels with tubular motors are composed of the following components:
- Blades carpet
- Ax
- Optional accessories
- Motor
Blade carpet It is absolutely necessary because the closure is carried out with his help. The blades are of different patterns, but all are made of galvanized steel. The last five blades on top of the carpet are always full, and they don't depend on the shape of the others. Weight differs depending on the type of blade used, and there are no clips between the blades.
Accessories carpet blades:
- The anti-storm tank They are fixed with pop pins on the full blades, they are mandatory to the class of wind 5. It assembles from 4 to 4 blades, and their use is only for grills that have anti-storm guides.
- Corneals are recommended for curtains with widths greater than 3500 mm. They fit on the last blade and choose depending on the length of the curtain.
- Axis the roll metal curtain is made of galvanised steel, the one to which the blade carpet is attached. He is chosen depending on the weight of the carpet of the blades. (MCA site image).
- Guide is of profiles .U., made by galvanized steel, and has no camera. Its role is to ensure a smooth picking of the blade carpet. Guides are not provided with a fall or side brush. Simple and anti-storm guides are chosen according to the width of the curtain.
Optional accessories:
- Colors: The box can have any color in the Ral range, depending on the preference.
- Box: It is made of galvanized steel, has a square shape, and the side can be up to 4 m.
- Lock cylinder lock/mechanical unlock: It helps to protect against effraction by possible locking and unlocking the curtain. lock cylinder is mounted on the last blade and realizes locking in left or right guide.
- Contact Electric: It prevents the curtain from opening when lock cylinder blocks it. It fastens next to the mechanical cylinder lock, at the bottom of the roller metal curtain.
- Side Chess: Reduce the noise level, perform an additional sealing. Reinforcing guidance: Ensures an effective fixing for storm-proof guides, being located from 500 to 500 mm. They are available in 2 different sizes, with frontal and lateral fastening.
Electrical power: The tube motors are fixed in the axis, being the ones that open and close the carpets of the blades.
Automated accessories:
- Sus-Stop-Jos control panel (needs a person present to act the curtain)
- Photocells
- Warning lamp
- Safety edge
- Remote controls
- Control button
- Key selector
Mounting types: The metal roller curtains with tubular motor can be mounted in 4 different ways that differ depending on the space and the conditions that their installation requires. Depending on the position of the axis, the curtain is mounted inside the void or on the wall, and depending on the position of the lamellar carpet, there is mounting with the outer curtain and mounting with the inner curtain. Measurement of the wall installation space: The precise measurement of the dimensions of the space in which a roll metal curtain is to be mounted is an essential condition for the curtain to function properly. At the same time, the length and height of the curtain must be measured for easy mounting.
| Limits on mounting metal curtains roll with weighing arches: | |
| Minimum dimensions: | Length 1000 mm and height 1000 mm |
| Maximum dimensions: | Length 6000 mm, height 5000 mm, surface 30 mp and length 4000 mm |
| Wind class: | Wind class 2 (length up to 5000 mm) and wind class 3 (length over 5000 mm) |
| Manual actuation: | Maximum weight 240 kg, maximum length 3000 mm and maximum height 3000 mm |